How Much Does It Cost to Pebble Tec A Pool?

Have you noticed any chips or damage in your pool floor lately? Does the pool water look dull even after repainting the floor finish? Are you planning to sell your home and looking for a way to increase its market value?

If you answered yes to any of these questions, it might be time to resurface your pool with Pebble Tec. There are many types of pebble finishes available, but nothing can beat the original Pebble Tec.

Resurfacing your pool with Pebble Tec can easily make an old pool look brand new again. If you’re wondering how much does it cost to Pebble Tec a pool, this article can help you.


Average Cost of Pebble Tec Pool

A pebble finish is more accurately called as an aggregate finish. An aggregate pool finish incorporates small pebbles and stones and glues them together with a specially mixed cement. The combination of stones and pebbles gives off a more natural and textured feel, as compared to plaster and quartz.

Pebble Tec is the pioneer company that launched the pebble pool finish. Because of this, their company name has become synonymous with pebble finish. So when people say Pebble Tec, what they really mean most of the time is pebble finish.

In terms of prices, a typical Pebble Tec pool resurfacing cost is estimated at $5,000 to $7,000 for simple resurfacing projects. Meanwhile, the more high-end Pebble Tec remodels can easily cost as much as $8,000 to $15,000.

Luxury pool in villa

Cost per square foot

When the cost is calculated in terms of surface area, the average Pebble Tec estimate usually ranges from $5 to $10 per square foot. This means that a pool with a thousand square footage will cost about $5,000 to $10,000 to resurface. This is due to the high quality of the Pebble Tec finish that other pebble materials do not have.


Pebble Tec Design

Pebble Tec pool resurfacing cost can also be influenced by the size and color of the pebbles used. For example, you can expect to pay between $5,000 and $7,000 for a pebble finish with small pebbles. On the other hand, costs can run as much as $13,000 to $15,000 for a pebble pool with large pebbles.

Pebble Tec designs speckled with blue and black pebbles also tend to cost more than the light-colored ones. This is due to the extra cost that goes into the dyes. Dark-colored pebbles are also shipped from more distant sources, hence the higher cost.


Labor Cost and Prep Work

The labor cost for pool resurfacing jobs usually starts at $66 to $88 per hour in the lower range and can go as much as $94 to $102 per hour in the upper range.

However, take note that the total number of hours spent for labor is directly affected by the amount of work that needs to be done. Normally, a Pebble Tec resurfacing job takes between 3 to 5 days. This small detail is very important as it could help you avoid being shocked when the final bill comes, especially when the contractor charges by the hour.


Like all pool remodels, a prep work is required before the actual work starts. The old pool finish, drains, and other pool components must undergo undercut and chipping. After that, a general cleaning will follow. Prep work for an average-sized pool with a Pebble Tec finish ranges from $1,200 to $1,600.

Additional Costs

If you want to renovate or remodel your entire pool area and not just the interior surface, you can expect to pay anywhere between $10,000 and $20,000. This includes changing the waterline tile, decking, and plumbing and electrical repairs.

For homeowners with in-ground spa, renovating it together with the pool may save you money because materials and labor are sold as a package. The usual spa renovation can cost somewhere between $1,400 and $1,600. Note that this price estimate is only for the re-plastering. Both coping and tiling will be considered extra work and will incur additional fees.


It’s also important to remember that for big pool beautification projects like these, some contractors are willing to give a discount as much as $800. But if you show off your bargaining powers, this could easily become $1,000 off the final bill.

Cost Factors

  • Location

Like most home improvement projects, the average Pebble Tec estimate varies across different cities, states, and even zip codes. The difference is due to the different costs of living in each area. For example, homeowners in Los Angeles tend to pay more compared to residents in Sacramento even though they’re in the same state.

In the case of pool resurfacing, the difference in costs can also be related to the climate. Warm and sunny states usually have a lot of swimming pools, and with it comes a lot of pool servicing companies.


A survey conducted by shows that the top three states with the most pool servicing companies per capita are Arizona, Florida, and Nevada. Meanwhile, research from P.K. Data finds that of the 5 million in-ground pools in the US, 40% are located in California and Florida.

Due to the numerous pool companies in these states, the competition can drive the price down. However, the final price to the question “how much does it cost to Pebble Tec a pool?” is still dependent on the cost of living in the city you live in.

  • Color and style of pebbles

Aside from the original Pebble Tec design, there are other textures offered by Pebble Tec. Each style has its own characteristics and of course, its own price. Generally, the smoother the texture of the pebbles, the more expensive they are. The pebble color can also influence the price depending on its availability.


  • Size, shape, and depth of pool

The size, shape, and depth of the pool also have considerable effects on the overall Pebble Tec cost. These factors determine how long the contractor will work. They also influence the amount of materials that need to be bought and installed. Large pools or one with extra features like an in-ground spa will cost more and take more time than an average-size pool.

  • Pool condition and prep work

All pool resurfacing jobs start with a prep work. A poorly done prep work could lead to costly problems later. Any savings you made by cutting corners can easily be drained.

The materials and labor spent for the prep work is influenced by the pool’s current condition. A severely damaged pool requires more time for prep work as it will need several repairs.



Pebble Tec may cost more than the standard pool plaster, but it’s more durable and more resistant to stain and discoloration. A plaster finish needs to be replaced every 5 to 7 years while a Pebble Tec pool can last up to 20 years. Plus, it also has a non-slip surface so if you have small children, Pebble Tec is a safer choice than plaster.

Resurfacing a pool is labor-intensive and requires specific equipment usually sold only to pool professionals. Even though you may choose to DIY, it’s not really recommended unless you’re a pool pro. To avoid wasting money on mistakes, it’s better to leave pool resurfacing to the experts.


A renowned home improvement expert with almost 20 years of experience in building and repairing beautiful homes in the USA. He's a civil engineer by profession.

1 thought on “How Much Does It Cost to Pebble Tec A Pool?”

  1. We re-did our pool in September 2014 with Pebble Tec. What did we get for the pricey re-do? Bloody feet, arms, legs, hands, anything that the unfortunate victim accidentally rubs against the surface. Sorta takes the fun out of swimming! I tell everyone I can to STAY AWAY FROM PEBBLE TEC!


Leave a Comment